Custom CoverKing Car Covers - Satin Stretch

Satin Stretch car covers

Satin Stretch is an indoor Custom Car Cover fabric. It will fade if exposed to extended sun, and is not water resistant. Satin Stretch is the SOFTEST fabric available, and has Lycra yarns to hug every contour of a vehicle. Blind stitching results in invisible seams - this is a SEXY car cover.

Manufacturer: CoverKing

Lambo Doors / Vertical Door Kits - Store

Dash Trim Kits - Store

Custom Car & Truck Covers - Store

Custom Seat Covers - Store

Dash Covers - Store

Grilles & Bull Bars - Store

Click Here To Open All Shopping Options

Shopping Options

Satin Stretch Car Covers

Black Satin Stretch Car Covers

CoverKing Satin Stretch custom car & truck covers

Black Heritage Satin Stretch Car Covers

Blue Satin Stretch Car Covers

Gray Satin Stretch Car Covers

Green Satin Stretch Car Covers

Pearl White Satin Stretch Car Covers

Red Satin Stretch Car Covers

Tan Satin Stretch Car Covers

Yellow Satin Stretch Car Covers

Made of perfect blend of soft Nylon and Polyester materials, Stretch Satin car covers are custom made-to-fit car covers. The soft Nylon fabric caresses your car finish softly. On the other hand, Polyester fabric makes car covers strong and effective.

As the name suggests, Stretch Satin car covers display superb stretch and breathability. The elastic material enables custom tailored car covers to embrace all the contours of your vehicle. Most suitable for indoor purpose, the affordable car covers allow trapped moisture and heat to escape and prevent rust damage.

One of the most effective car covers available in the market, the premium quality auto accessories from Coverking are available in the wide array of youthful and vibrant colors. Besides hugging your car exteriors gently, the silky material used in our custom-fit car covers makes them user friendly as well making your car care regimen an effortless adventure.

Installation Guide:

Before Installation:

Before installing the Stretch Satin Car Cover over your vehicle, you are required to adopt a few precautions. First of all, you should ensure that your vehicle is clean and dust free before moving ahead to implement product installation. If you put the Stretch Satin Car Cover over your vehicle without removing the dust and dirt particles, you are simply damaging the finish of your car cover by embedding dust particles into the cover. So, it is urgently necessary to clean the body of your car properly and for this purpose you can use Coverking’s special silk dustier. To known more about this product, contact your retailer.

As soon as you clean your car body properly, you can move ahead to install the Stretch Satin Car Cover over it. Also bear in mind that you are not recommended to install the car cover over your vehicle if it is wet and not dry.

The Installation Process:

The Stretch Satin Car Cover installation process includes the following steps:

In the very first step, you are required to unroll the car cover by positioning it over the hood of your vehicle.

After placing the Stretch Satin Car Cover over your vehicle and unfolding it, you can move ahead to install the mirror pockets if they are outfitted to your car cover. Once you are over with installing the mirror pockets, you can cover the front and rear portions of your car with the Stretch Satin Car Cover at ease.

Installation Of Your Car Cover Lock Kit:

If you have purchased a lock along with your with your Stretch Satin Car Cover, it can be especially helpful to prevent theft of your car cover. Before installing the lock kit, cover the vehicle properly with your Stretch Satin Car Cover and thereafter you can install the lock kit by following the simple steps mentioned below:

Lock kits have a vinyl coated cable equipped with a metal piece on one end and a loop attached to the other end of the cable. You have to start installing the lock kit from the passenger corner of the draped vehicle by fixing the loop of the cable at a position of around two inches through the grommet. Thereafter, take the metal piece end along under the grommet; through the loop of the first cable end pull it under the car to the driver’s corner. Now at the driver’s side, you can push the cable from outside the cover by two inches through the grommet and thereafter you can easily lock the end piece to the cable body.

Important Installation Instructions:

While installing the Stretch Satin Car Cover over your vehicle, please take extra care to ensure that your car cover never comes in contact with your exhaust tips if they are hot or if they are sharp edged. This precaution is necessary as when your Stretch Satin Car Cover comes in touch with exhaust tips that are too hot or sharp edged, it is likely to melt instantly.

In case if your car is equipped with an antenna positioned fixedly over it, you need to induce a proper opening in your car cover for proper installation. To achieve this, first of all, you need to take away the antenna and place the Stretch Satin Car Cover over the vehicle. Thereafter as you figure out the base of the antenna, you can cut a small portion of your car cover at the position where the antenna touches the base of the car. After that, you need to install the antenna and as it is completed, you can wrap the Stretch Satin Car Cover around the antenna patches.

Cleaning Instruction:

To clean your Stretch Satin Car Cover properly, you can undertake hand washing and also, it is possible to cleanse your Stretch Satin Car Cover through the machine cleaning process. Simple hand washing can be applied to Stretch Satin Car Covers that are not significantly dirty and for machine cleaning of your Stretch Satin Car Cover; you can opt for M/Cs. These M/Cs are automatic speed control washers and large M/Cs would be particularly suitable for the purpose of washing your Stretch Satin Car Cover as you may not be able to wash your car cover properly in small washing space. However, the use of agitators may seriously damage your car cover fabric and as such agitators are not recommended to be used in machine cleaning.

The Proper Cleaning Procedure:

Before starting off to clean your Stretch Satin Car Covers, you should remember that the cleaning process is successful only at 20-27 degree centigrade. Alongside, you are not recommended to use an automatic dryer in the process and altogether you should not attempt to dry clean by any other process.

The Stretch Satin Car Cover cleaning process includes the following steps:

First of all, you are instructed to opt for a non-caustic, non-toxic, bio-degradable and an environment friendly anionic detergent and mix this detergent with warm/cold water. You can take 2 cups of this detergent and mix it with warm and cold water and thereafter you can soak the cover in it for a brief 5 minutes to release the dust particles attached to your cover.

In the second step, you are required to undertake 5 minute washing of your Stretch Satin Car Cover with gentle cycles and then you can initiate a two cycle rinsing of your Stretch Satin Car Cover with cold water. As it is finished off, you are required to again initiate one cycle rinsing of the cover which would further make it half dry. As you’re Stretch Satin Car Cover is half dried, you can place it over your vehicle body and leave it to dry completely by the affect of air.